الفيزياء الإشعاعية

أنبوب الأشعة والمحوّلة والمقوّم والمولّدX-ray Tube, Transformer, Rectifiers & X-ray Generator — Second Experiment in Practice

عملي · م02 · 4.4 دقيقة
أقسام المحاضرة (8)
  1. مقدمة: أنبوب الأشعة السينيةIntroduction: The X-ray Tube
  2. الكاثود: الفتيلة وكأس التركيز1- Cathode: Filament & Focusing Cup
  3. الأنود والهدف2- Anode & Target
  4. المحوّلةTransformer
  5. المقوّماتRectifiers
  6. مولّد الأشعة السينية2- The X-ray Generator
  7. أنواع مولّدات الأشعة السينيةTypes of X-ray Generators
  8. تموّج الجهدVoltage Ripple

مقدمة: أنبوب الأشعة السينيةIntroduction: The X-ray Tube

Introduction: An x-ray tube consists of two electrodes sealed into an glass envelope. 1-The cathode 2-The anode

مقدمة: يتكوّن أنبوب الأشعة السينية من قطبين كهربائيين محكَمَي الإغلاق داخل غلاف زجاجي: 1- الكاثود 2- الأنود.

X-ray tube: cathode, anode, vacuum tube, electron beam and X-ray beam; and a real tube showing anode, cathode and X-rays.
X-ray tube: cathode, anode, vacuum tube, electron beam and X-ray beam; and a real tube showing anode, cathode and X-rays.
الفكرة المهمةأنبوب الأشعة = قطبان (كاثود وأنود) داخل غلاف زجاجي.An x-ray tube consists of two electrodes (cathode and anode) sealed into a glass envelope.

الكاثود: الفتيلة وكأس التركيز1- Cathode: Filament & Focusing Cup

The cathode is the negative side of the x-ray tube because it is a source of electrons and has two primary parts :

الكاثود هو الجانب السالب من أنبوب الأشعة لأنه مصدر الإلكترونات، وله جزءان رئيسيان:

أ- الفتيلةA- The filament

  • • Structure: A wire coil, approximately 2 mm in diameter and 1 to 2 cm in length.التركيب: ملف سلكي قطره نحو 2 مم وطوله 1 إلى 2 سم.
  • • Function: Emits electrons when heated to high temperatures (around 2200°C).الوظيفة: تبعث الإلكترونات عند تسخينها إلى درجات حرارة عالية (نحو 2200 درجة مئوية).
  • • Power Requirements: Operates efficiently with a current of 4-10A and a voltage of 10V.متطلبات القدرة: تعمل بكفاءة بتيار 4–10 أمبير وجهد 10 فولت.
  • • Mechanism (Thermionic Emission): The intense current provides enough energy to "boil off" and eject outer shell electrons from the filament's atoms.الآلية (الانبعاث الحراري للإلكترونات): التيار الشديد يعطي طاقة كافية «لغلي» إلكترونات الغلاف الخارجي وقذفها من ذرات الفتيلة.

ب- كأس التركيزB-The Focusing cup

Function: Controls the width and spread of the electron beam and directly toward the target (anode).

الوظيفة: يتحكّم بعرض حزمة الإلكترونات وانتشارها ويوجّهها نحو الهدف (الأنود).

الفكرة المهمةالفتيلة (2 مم × 1–2 سم) تبعث الإلكترونات بالانبعاث الحراري عند ~2200°م، وكأس التركيز يضيّق الحزمة ويوجّهها للهدف.The filament emits electrons by thermionic emission (~2200°C); the focusing cup controls the beam and directs it to the target.

الأنود والهدف2- Anode & Target

The anode is the positive side of the x-ray tube, which divided into two types: A- Stationary , B- Rotating

الأنود هو الجانب الموجب من أنبوب الأشعة، وينقسم إلى نوعين: أ- الثابت، ب- الدوّار.

Rotating-anode tube: spinning anode, tungsten target, glass envelope, stator, rotor, bearings, focusing cup, hot cathode filament, electrons, window and X-ray photon beam.
Rotating-anode tube: spinning anode, tungsten target, glass envelope, stator, rotor, bearings, focusing cup, hot cathode filament, electrons, window and X-ray photon beam.
الفكرة المهمةالأنود هو الجانب الموجب (ثابت أو دوّار)، والهدف هو المنطقة التي تضربها الإلكترونات.The anode is the positive side (stationary or rotating); the target is the area struck by electrons.

المحوّلةTransformer

  • • Transformer Uses electromagnetic induction to vary voltageالمحوّلة تستعمل الحث الكهرومغناطيسي لتغيير الجهد.
  • • Consists of an iron core , a primary winding , and secondary winding .تتكوّن من قلب حديدي وملف ابتدائي وملف ثانوي.
  • • Step-up Transformer: Increases the voltage on the secondary winding compared to the primary.المحوّل الرافع: يرفع الجهد على الملف الثانوي مقارنةً بالابتدائي.
  • • Step-down Transformer: Decreases the voltage on the secondary winding compared to the primary.المحوّل الخافض: يخفض الجهد على الملف الثانوي مقارنةً بالابتدائي.
Step-up transformer (Vp = 120 V fewer turns → Vs = 240 V more turns) and step-down transformer (Vp = 240 V more turns → Vs = 120 V fewer turns).
Step-up transformer (Vp = 120 V fewer turns → Vs = 240 V more turns) and step-down transformer (Vp = 240 V more turns → Vs = 120 V fewer turns).
الفكرة المهمةالمحوّلة تغيّر الجهد بالحث الكهرومغناطيسي: المحوّل الرافع يرفع جهد الثانوي (لفّات أكثر) والخافض يخفضه.A transformer varies voltage by electromagnetic induction: step-up increases, step-down decreases the secondary voltage.

المقوّماتRectifiers

  • • A rectifier converts Alternating Current (AC) into Direct Current (DC) using one or more P-N junction diodes.المقوّم يحوّل التيار المتناوب (AC) إلى تيار مستمر (DC) باستعمال صمّام ثنائي (دايود) واحد أو أكثر من نوع P-N.
  • • A diode acts as a one-way valve, allowing current to flow in one direction while blocking the opposite direction.الصمّام الثنائي يعمل كصمّام باتجاه واحد: يسمح بمرور التيار في اتجاه ويمنعه في الاتجاه المعاكس.
  1. 1. Half-wave rectifier: Converts only one half of the AC cycle into DC, resulting in lower efficiencyمقوّم نصف الموجة: يحوّل نصف دورة التيار المتناوب فقط إلى تيار مستمر، فتكون الكفاءة أقل.
  2. 2. Full-wave rectifier: Converts both the positive and negative halves of the AC cycle into DC,resulting in higher efficiencyمقوّم الموجة الكاملة: يحوّل النصفين الموجب والسالب من دورة التيار المتناوب إلى تيار مستمر، فتكون الكفاءة أعلى.
Half-wave and full-wave rectifier circuits with their input AC and output DC waveforms.
Half-wave and full-wave rectifier circuits with their input AC and output DC waveforms.
الفكرة المهمةالمقوّم يحوّل AC إلى DC بالدايودات؛ نصف الموجة كفاءته أقل، والموجة الكاملة كفاءته أعلى.A rectifier converts AC to DC using diodes; half-wave = lower efficiency, full-wave = higher efficiency.

مولّد الأشعة السينية2- The X-ray Generator

The X-ray generator is the power source of the X-ray tube. It supplies the electrical power and signals required for tube operation.

مولّد الأشعة السينية هو مصدر القدرة لأنبوب الأشعة؛ يزوّده بالقدرة الكهربائية والإشارات اللازمة لتشغيله.

الوظائف الرئيسيةMain Functions :

  1. 1. It supplies current at a high voltage to the x-ray tube (20 to 150 kV) needed for x ray production.يزوّد أنبوب الأشعة بتيار بجهد عالٍ (20 إلى 150 كيلوفولت) لازم لإنتاج الأشعة السينية.
  2. 2. The tube voltage is supplied Symmetrically to the tube, i.e. a net potential difference of is achieved by feeding -75 kV to the cathode and +75 kV to the anodeجهد الأنبوب يُجهَّز بشكل متناظر، أي يتحقّق فرق الجهد الكلي بتغذية الكاثود بـ −75 كيلوفولت والأنود بـ +75 كيلوفولت.
Power source (high voltage & signals), x-ray tube, high voltage supply (20–150 kV): −75 kV (cathode) and +75 kV (anode), total difference 150 kV.
Power source (high voltage & signals), x-ray tube, high voltage supply (20–150 kV): −75 kV (cathode) and +75 kV (anode), total difference 150 kV.
الفكرة المهمةالمولّد يجهّز الأنبوب بجهد عالٍ 20–150 كيلوفولت، بشكل متناظر (−75 للكاثود و+75 للأنود = 150).The generator supplies 20–150 kV symmetrically: −75 kV to the cathode and +75 kV to the anode.

أنواع مولّدات الأشعة السينيةTypes of X-ray Generators

أ- المولّدات أحادية الطورA-Single-Phase Generators :

  • • Full-wave rectification produces two pulses per AC cycle.تقويم الموجة الكاملة ينتج نبضتين لكل دورة تيار متناوب.
  • • At 60 Hz: 120 pulses per second.عند 60 هرتز: 120 نبضة في الثانية.
  • • Voltage ripple: 100%.تموّج الجهد: 100%.
  • • Voltage drops to zero between pulses.الجهد ينزل إلى الصفر بين النبضات.
  • • Produces lower energy soft x-rays , longer exposure time, greater patient doseتنتج أشعة ليّنة أقل طاقة، وزمن تعرّض أطول، وجرعة أكبر للمريض.

ب- المولّدات ثلاثية الطورB-Three-Phase Generators

  • • Combines multiple voltage waveforms.تجمع عدة أشكال موجية للجهد.
  • • Voltage ripple: approximately 5-15%, depending on design.تموّج الجهد: نحو 5–15% حسب التصميم.
  • • Voltage does not drop to zero during exposure.الجهد لا ينزل إلى الصفر أثناء التعرّض.
  • • Higher effective X-ray energy and improved output compared with single-phase systems.طاقة فعّالة أعلى للأشعة وناتج أفضل مقارنةً بالأنظمة أحادية الطور.
  • • Generally allows shorter exposure times.تسمح عموماً بأزمنة تعرّض أقصر.

ج- المولّد عالي الترددC- High frequency generator:

  • • using a high- frequency electric circuitيستعمل دائرة كهربائية عالية التردد.
  • • standard frequency increase from 60 Hz to 500 KHzالتردد القياسي يرتفع من 60 هرتز إلى 500 كيلوهرتز.
  • • Voltage ripple: less than 1% in modern designs. Nearly constant potential.تموّج الجهد: أقل من 1% في التصاميم الحديثة؛ جهد شبه ثابت.
  • • more efficient than 3-phase generatorsأكفأ من المولّدات ثلاثية الطور.
  • • Short exposure times and Can reduce patient dose.أزمنة تعرّض قصيرة، ويمكن أن يقلّل جرعة المريض.
  • • reduced low-energy radiation and Increase x-ray tube life.يقلّل الإشعاع منخفض الطاقة ويطيل عمر أنبوب الأشعة.
الفكرة المهمةتموّج الجهد: أحادي الطور 100% (ينزل للصفر)، ثلاثي الطور 5–15%، عالي التردد أقل من 1% (جهد شبه ثابت).Voltage ripple: single-phase 100%, three-phase ~5–15%, high frequency < 1%.

تموّج الجهدVoltage Ripple

refers to the fluctuation in voltage output of some X-ray generators. aslo is defined as the difference between the peak voltage and the minimum voltage, divided by the peak voltage and multiplied by 100

تموّج الجهد يشير إلى التذبذب في الجهد الخارج من بعض مولّدات الأشعة السينية. ويُعرَّف أيضاً بأنه الفرق بين ذروة الجهد وأقل جهد، مقسوماً على ذروة الجهد ومضروباً في 100.

Voltage ripple: R = (kVp − kVmin) / kVp × 100%.
Voltage ripple: R = (kVp − kVmin) / kVp × 100%.
X-ray generator waveforms & voltage ripple: half wave 100%, full wave 100%, three phase six pulse 14%, three phase twelve pulse 4%, high frequency < 1%.
X-ray generator waveforms & voltage ripple: half wave 100%, full wave 100%, three phase six pulse 14%, three phase twelve pulse 4%, high frequency < 1%.
Closing page of the lecture: "Thank you".
Closing page of the lecture: "Thank you".
الفكرة المهمةتموّج الجهد = (ذروة الجهد − أقل جهد) ÷ ذروة الجهد × 100%.Ripple R = (kVp − kVmin) / kVp × 100%.

عندك سؤال؟ اسأل المساعد